LMX-UB™ is an economical polymer that exhibits low tensile strength and very high elongation (>700%) while providing a tenacious bond to certain thermoset plastic surfaces. Adheres to many polymeric substrates, both new and aged, typically without the use of primers or extensive surface preparation. LMX-UB™ was stretched and relaxed at 30 pulls per minute, double…
Read More
POLYPRIME-100™ is a two-component 100% solids primer with excellent wet-out properties for deep penetration. POLYPRIME-100™ may be top coated or used as a stand-alone rust corrosion inhibitor.
Read More
POLYSHIELD HT-100F™ is a fast-set, high-performance, spray- applied, plural-component, pure polyurea elastomer. This system is based on amine-terminated polyether resins, amine chain extenders, and prepolymers. It provides a cost effective flexible, tough, resilient monolithic membrane with water and chemical resistance. POLYSHIELD HT-100F™ is an excellent choice of elastomer to topcoat geotextile fabrics for primary or…
Read More
POLYSHIELD HT- SL™ is a fast-set, high-performance, spray- applied, plural-component, pure polyurea elastomer. This system is based on amine-terminated polyether resins, amine chain extenders and prepolymers. It provides a flexible, tough, resilient monolithic membrane with good water and chemical resistance.
Read More
PTU UB™ is a new generation of high-performance polyurea coating and is the result of six years of development and field testing. This chemical resistant coating provides high-ductility, allowing it to move with expanding and contracting surfaces. PTU UB™ can be sprayed to any thickness in one application and returned to service in a matter…
Read More
PTU-AR™ is the newest product in the PTU chemistry group. This chemical resistant coating provides high-ductility, allowing it to move with expanding and contracting surfaces. PTU-AR™ can be sprayed to any thickness in one application and returned to service in a matter of hours. It is resistant to many acids, alkalines, and caustics in immersion…
Read More
PTU™ is a new generation of high-performance polyurea coating and is the result of six years of development and field testing. This chemical resistant coating provides high-ductility, allowing it to move with expanding and contracting surfaces. PTU™ can be sprayed to any thickness in one application and returned to service in a matter of hours.
Read More
SPI ENVELO-SEAL™ 2.7 HDS is a two- component, closed cell polyurethane system for sprayed-in-place applications. This foam is low viscosity and is specifically designed for high dimensional stability foam for tooling, molds, pipelines, roofs, foundations, fish holds, and other commercial/industrial surfaces. This product has excellent processing characteristics. High dimensional stability and adhesion to substrate. This…
Read More
STAINGARD 6000™ is a 100% solids by volume, aliphatic polyaspartic coating, two component, liquid applied, environmentally friendly surface topcoat for waterproofing membrane systems, with a citrus odor. STAINGARD 6000™ is quick curing and specifically formulated to be installed in thin film applications.
Read More
STAINGARD 6072™ is a 72% solids by volume, aliphatic polyaspartic coating, two component, liquid applied, environmentally friendly surface topcoat for waterproofing membrane systems, with a citrus odor. STAINGARD 6072™ is quick curing and specifically formulated to be installed in thin film applications.
Read More
AMP-100™ spray-applied, plural-component polyurea, is a unique synergy of aliphatic and aromatic polymer chemistry. AMP-100™ pure polyurea is formulated using amine terminated polyether resins, amine chain extenders, and aliphatic and aromatic prepolymers. For many applications this highly cross-linked elastomer offers an economical alternative to pure aliphatic protective coatings. AMP-100™ can be used as a stand-alone…
Read More
ULTRA BOND-100™ is a high tensile, high elongation, high build, fast-set, elastomer, specifically formulated to provide a tenacious bond to certain thermoset plastic surfaces. Unlike most spray- applied polyureas ULTRA BOND-100™ has the unique advantage of adhering to many polymeric substrates, both new and aged, typically without the use of primers or extensive surface preparation.
Read More
AQUASEAL™ is a state-of-the-art, high performance, spray applied plural-component pure polyurea elastomer. This system is based on amine-terminated polyether resins, amine chain extenders and MDI prepolymers. It provides a flexible, resilient, tough, monolithic membrane with water and chemical resistance.
Read More
ULTRA BOND-HT-FC™ is a high tensile, high elongation, high build, fast set, elastomer, that is compliant with FDA 21 CFR 175 300 (c)(d) high temperature heat-sterilize, non-acid aqueous food contact, specifically formulated to provide a tenacious bond to certain thermo- set plastic surfaces. Unlike most spray applied Polyureas ULTRA BOND-HT-FC™ has the unique advantage of…
Read More
DRAGONSHIELD-BC™ polyurea represents a breakthrough in plural-component spray applied polymer technology. This ultra high-strength polymer was developed specifically for blast mitigation and fragment/spall containment. *Tests conducted on DRAGONSHIELD-BC™ protected surfaces compared to unprotected surfaces document that DRAGONSHIELD-BC™ will significantly reduce damage caused by blast effects. Properties include: Ultra high tensile strength Moderate elongation Superior tensile…
Read More
────── Taiwan Green Material Label Product ────── HKGBC Eco-Product ────── WRAS Approved Material ────── Passing NSF drinking water test PENTENS SPU 1000 is a solvent free, two-component pure polyurea spray coating. The seamless coating provides an elastic yet tear resistant surface for applications subjected to extreme wear and tear, strong impact and chemical exposure. Except…
Read More
Epoxy Prime 90™ is a two pack 100% solids low viscosity epoxy primer used for surface preparation.
Read More
HARD CAP-100™ is a 100% solids (0 VOCs) 1:1 ratio plural aliphatic polyurea. It is available in White and several standard colors,* as well as clear. HARD CAP-100™ is an ideal choice when a durable high build coating for interior or exterior applications with excellent color stability and gloss retention is required. HARD CAP-100™ provides…
Read More
K5 HI-TEMP™ is a high-strength, abrasion resistant polyurea, developed as a resilient polymer to withstand higher contact temperature than conventional polyurea elastomers. K5 HI-TEMPTM can be sprayed on to virtually any surface configuration, at any thickness. Therefore, it can be selectively applied to high-wear areas.
Read MoreWe offer high performance coatings and professional coating products and solutions for the industrial market.
View all of our productsDeveloped by webgraphic webdesign agency. Recomandat de anvelope magazin online.
